5 thoughts on “How can I make gold and silver jewelry not fade?”

  1. The following is a way to prevent gold and silver jewelry from fading:
    1. Do not wear gold and silver jewelry swimming
    Although the chemical reactions of gold and silver jewelry and other substances are not active, wearing still requires extra carefulness, such as, for example, for example, for example, for example Swimming in the pool is absolutely not suitable to wear gold and silver jewelry. Because the pool water is chlorine, chlorine can make the gold jewelry oxidize dull.
    2. Do not clean it with bleach
    Whether the bleach is diluted, the chemical ingredients contained in the inside will affect the color of gold and silver jewelry (1293.4,16.63, 1.30%). In addition to glory, it also affects its natural colors.
    3. Do not wear gold and silver jewelry hair
    It take care of hair in the hair style house, especially hair dyeing and perm. Remember to remove the necklace or earrings first, because the chemical composition contained in the hair dye and the electrical potion is It will make the junction on the gold and silver jewelry or the color degeneration of the joint, destroying the overall beauty of the gold jewelry.
    4. Be careful to prevent too high temperature differences
    Due to the high heat transfer rate of gold and silver jewelry, the calories of steam may burn the skin through gold and silver jewelry, so remember to take the golden bath when you enjoy the steam bath Silver jewelry.
    5. Do not contact the metal with prone to occur. n When wearing and stored in gold and silver jewelry, avoid contact with items such as lead and mercury (mercury).

  2. The discoloration or fading of gold jewelry is closely related to human sweat. 99%of human sweats are water, and about 1%are waste and harmful substances in the human body, such as chlorine substitutes, lactic acid, urea ammonia, etc. After contacting the silver and copper in gold jewelry, these substances will produce chemical reactions, produce silver chloride and copper sulfide, and show dark black chemical salt. This kind of chemical salt is often dropped from gold jewelry to pollute the skin of the wearer, leaving a very obvious black stain on the skin. At present, cosmetics have also become one of the indispensable “characters” of people’s lives. If you apply it on the skin of the gold jewelry, it will undoubtedly provide opportunities for cosmetics containing chemicals and the golden jewelry that is most afraid of chemical erosion, and the results can be imagined. Some cosmetics also contain some fine hard particles, which can form another type of dirt, thereby wear gold jewelry. Regional environmental factors may also make gold jewelry lose their bright color. For example: dry areas, the air contains more fine dust. After the human body is contaminated, it will form a “human sandpaper”. It can wear gold jewelry to erode extremely fine debris and local black stains. It is worth mentioning that the refreshing powder or moisturizing cream also contains similar particles, which will also make gold jewelry barely like the above. Treatment method: Wash with soapy water mixed with a little alcohol and dry it after rinse. 925 silver jewelry: Generally, the sterling silver jewelry sold on the market is 925 silver instead of 999 sterling silver, because 925 silver is the alloy silver made of other metals. The sterling silver, its proportion of 7.5%alloy and 92.5%silver. Such silver forged jewelry is strong and less easily worn and deforming. The real 999 sterling silver The jewelry made of sterling silver will take into account durability. It will not be deformed within a few days and the surface wear is too severe and requires continuous polishing. How to maintain sterling silver jewelry? The biggest cause of the oxidation of silverware is the oxygen in the air, so blocking air is the best way to maintain. For example, put the silver jewelry in a sealed plastic bag and then put it in the jewelry box to block the contact with the silverware. When oxidation, you can use silver washing water or silver cloth to brighten the silver jewelry, but the silver washing water is stronger, so please try to wipe it with silver cloth as much as possible. Rush the water and rub it softly, clean the surface of the surface, and blow dry with a hair dryer, otherwise the oxygen in the water will accelerate the silverware oxidation! In addition, soak in 90 degrees of alcohol for 12 hours, and blow it dry after cleaning; or squeeze the toothpaste on the dry cloth and directly test it. The effect is also very good. Platinum jewelry has been longing for a long time. When an elegant and beautiful platinum jewelry brings you a beautiful feeling, can you think of how to take care of your beloved platinum jewelry and let it accompany you new? Teach you some simple methods here. When you do housework, do not let the wearing platinum jewelry dye oil or bleach water. Oil pollution will affect the gloss of the jewelry; bleaching water may cause the jewelry to produce spots. Although you are young, you want to be eye -catching, but you must not wear platinum jewelry and gold jewelry at the same time, because the gold texture is soft. If you rub each other, the gold powder will be adsorbed on the platinum, making the platinum yellowish, affecting the pure luster of platinum unique to the pure luster of platinum. Essence If you wear it frequently, the platinum jewelry should be cleaned once a month as much as possible to maintain a shiny luster. You can use dedicated jewelry cleaner to clean it by yourself. The correct method is to squeeze the toothpaste on the towel and rub it, hold the platinum jewelry with your hands, rub the fine lines and dust on the surface, and then wash it with diluted housewashing. The gloss can be recovered as new. If your platinum jewelry is inlaid with diamonds, it is recommended that you send platinum jewelry to the jewelry shop each year to check and make professional cleaning and renovation in time, so that platinum diamond jewelry is often worn. Just like beautiful flowers and plants need to take care of it, your platinum jewelry needs to take care of it to spend a good time with you. Although the color of the pearl jewelry is beautiful, it cannot withstand a long test. After decades, pearls will become ordinary yellow, and at the same time lose the beautiful pearl luster. This is the saying that the “old pearl yellow” is called. Why does pearl jewelry have been yellow for a long time? This is mainly to form the physical properties of the stone minerals that make up the pearl. When it takes a long time, it will become ordinary square stone. The style of the style of the stone, although the chemical ingredients are the same, their crystalline forms and gloss are not the same. This is why the pearl is discolored. After the pearl is yellow, there are some remedy methods, that is, soaked with dilute hydrochloric acid, which is soluble to remove the yellow shell, which makes the pearl reproduce the crystal and glory and charming color. However, if the color becomes very powerful, it will be difficult to reverse. After the installation, we wear pearl jewelry, because any beauty products (powder, foundation cream, etc.) will damage pearls, including perfume and glue. After wearing, the pearls should be soaked and dried with water. Diamond jewelry] Add water and laundry powder in the container, and cook your diamond ring in water for 10 minutes to soften the dirt on the top, then wash it with a toothbrush, rinse it in water, and then wash it with 90 degrees of wine. Finally take out to dry. Green pine jewelry: Wearing turquoise jewelry must be careful, it can absorb oil. Do not wear green jewelry when you apply sunscreen or milk on your body. Because once turquoise stains, it is difficult to restore it. Mattabol jewelry: It must be stored in a cool place. Because the egg stone contains a lot of water, it will be dehydrated in the sun or under strong light. The nursing method is to soak in water or sweet apricot oil for two days, and it will recover as before. In addition to the general principles of maintenance jewelry, in addition to the above principles, some jewelry of some jewelry has different characteristics of different gems, so there are some special requirements and precautions in maintenance. Gem jewelry such as sapphire, tourmaline, Topa (ie yellow). These gems have a hard texture and can withstand greater pressure, but they also have common disadvantages -they are crispy, and they are also explained for diamonds and Topa Stone, so these gems cannot withstand beating and hitting, otherwise they will be brittle due to brittleness. The collapse, or cracks in the direction of the solution due to the explanation, or even the broken crack. Remember, even the most hardness diamonds can not stand the impact. (2) Emerald jewelry. Although the emerald is strong and tough, it has a certain impact resistance. However, after processing, the jadeite products are often thinner, and they are damaged by impact. (3) Emerald jewelry. The hardness of emeralds is slightly greater than emerald, but it is crispy than emerald, so it cannot afford to impact and beat. In addition, emeralds are afraid of high temperature, and the fire will reduce the color and easily burst at high temperature. (4) Opal jewelry. Opal’s hardness is low, and you should avoid rubbing with other items. Opal contains moisture and should avoid high temperatures. Otherwise, after the evaporation is lost, it loses transparency, and it will burst. In addition, Opal is not acidic, so you should avoid high temperature and acidic substances when wearing Opal jewelry. When collecting Opal jewelry, you should also pay attention to the environment should not be too dry, otherwise it will cause dehydration and cracks, or even rupture. In order to prevent dehydration, in the dry season, it is advisable to soak Opal’s jewelry in water every time. (5) Amethyst jewelry. The color of the amethyst is unstable, and it will cause fading when it encounters high temperature or long -term exposure. During wearing or collecting, high temperature or exposure should be avoided. (6) Peacock and turquoise jewelry. The hardness of these two gems is watery than water, and it is very easy to wear. The chemical nature of the two is unstable, and it will be corroded and dissolved in acidic acid. The turquoise is easy to change color at high temperatures, and even for a long time sun exposure and sweat soaking, it will also change the color of the turquoise. These must be paid attention to during wearing and collecting. (7) Pearl and coral jewelry. The hardness of pearls and corals is very low, and it is easy to make the surface luster due to friction. Both ingredients are calcium carbonate, which will be corroded and dissolved when they encounter acid. It is easy to sweat in summer, and sweat can also cause the surface of pearls and corals to be damaged and lose the original luster. The powder, perfume and hair milk in cosmetics will also gradually lose color. Therefore, it is best not to wear such jewelry in summer. If you are stained by sweat, you can rinse in water, and then gently dry it with a soft fabric. Before the pearl jewelry, be sure to rinse with water, and you must avoid cosmetics. (8) Lvkin stone jewelry. After the laparimite jewelry is defiled, it must not be soaked and rinsed with water. Because greenite is a granular collection of a variety of minerals. If it is soaked and rinsed with water, the dirt on the surface of the gem will penetrate the interior, which will change the original glory of the green stone. After the green stone jewelry is stained, it can be wiped gently with a wet cloth and wiped off the dirt. For jewelry gold, it is as important as people. During the process of washing, it can activate tissue cells, remove dirt, and make the body and outside the body have a fresh feeling. They are in the best situation at any time, brilliant, and can grow their lives.
    a. Cleaning: Use a soft brush to dip the salad to remove it, but it is not possible to use irritating products such as fluoride toothpaste or bleaching water.
    b. Cleaning: Pure gold or K gold products, please do not touch the perm water and other items. After contact, white spots will be generated.
    c. Cleaning: Soak the diamond in warm soapy water for about 20 minutes, and light the bottom of the table with a soft brush, and then wash it with water (remember to stuff the flowing pores first to prevent the gem from falling off).
    d. Maintenance: After cleaning, pay attention to whether the diamond will loosen. Every 6 months should go to the jewelry shop for the jewelry store for your jewelry for thorough cleaning and inspection.
    (1) Cleaning and maintenance of gold and silver jewelry
    1, cleaning and maintenance of gold jewelry: cleaning in Huangfang jewelry shop, using ultrasonic washing grooves, washing the standard formula: 40c of warm water 1000 ml, water -free chromium without water chromium Elephalide 100 grams and 30 ml of sulfuric acid. The method is: hang the jewelry on the plastic sheet number, then wear copper wire, hang it on the stainless steel rod, suspend it in the washing tank, and the washing time is 80 to 120 seconds. The hand -cleaning method is to soak the jewelry in 30 % of the sulfuric acid washing solution for 5 minutes, wash it with a brush, then rinse under the tap water cage for 5 minutes, and finally use 20 % shampoo or washing fine foam 10 Wash in minutes, flush water for 20 minutes, and dry it with silk.
    2, cleaning and maintenance of silver jewelry: Use 50C temperature water 1000 ml, 200 ml of phosphate, 30 grams of concentrated laundry powder, wash the liquid ultrasonic cleaning tank for 100 seconds, and then rinse the water.
    The home cleaning: Pour the cleaning liquid in a container, soak the silver jewelry for 10 minutes, then wash it with a toothbrush, and then flush the water for 10 points.
    (2) Cleaning of gemstone jade
    The washing with a 20 % neutral dishwashing or shampoo, and a liquid temperature of 25 to the tadpole. Soak for 10 minutes, then slowly brush with a toothbrush. After removing the sweat staining dirt, soak it with tap water for 20 minutes.
    (3) The maintenance of jewelry jade
    It gold and silver jewelry jade rinse after rinse, such as scratching and scratches on its surface, you can apply a layer of white jade toothpaste on the surface, use Wipe the silk cloth, and you can also use a cloth wheel to polish, or glow with green oil. The chain and gold earrings can be poured a little watch oil on the hooks and screws, or the light coating protective film.
    The commonly used light protective film is paraffin. The commonly used gem protective film is pink nail polish. Nail oil is wide, such as chest ornaments, rings, earrings, ears, stirring, brooches, buttons, etc. At present, the popular protective agents are: transparent electrical paint, B0L acrylin paint; soz type polyuretine paint. It is mostly suitable for high -end gems, such as emeralds, rubies, salamanders, sea sapphires, emeralds, etc.
    (4) The cleaning and maintenance of pearls
    The cleaning of pearls should be wiped with soft paper or soft cloth containing silicon oil. For pearls with severe light and non -light dirt, 20 % salt water is soaked for an hour. Then wash it with a 3 % hydrochloric acid solution and rinse in water for 10 minutes. Pearls should not be exposed to sun exposure, tide and camphor and other camphor of hygiene.

Leave a Comment